background image

pg. 23

Ultrasonic cleaning equipment

Filnet B300 ultrasonic

Año

Year

TEINNOVA reserves the right to make changes to the equipment without giving prior notice.

TECAI INNOVA S.L.
C/ Las Balsas 16-B, Pol. Ind. Cantabria.
26009 LOGROÑO (La Rioja), Spain.

conditions of the guarantee

1.

“TEINNOVA” guarantees its products for a period of

15 days as regards aesthetic defects or faults which are
noticeable with the naked eye. In terms of all other manu-
facturing defects and faults in the products, the guarantee
is of 1 year.
The “Buyer” must notify “TEINNOVA” of the existence
of any defects as soon as they are observed and in any
case within a maximum deadline of 5 days from when
they become apparent. Notification thereof outside of
said deadline shall lead to the non-application of the
guarantee.
“TEINNOVA” reserves the right to request that the pro-
ducts be sent to the factory or the closest official Technical
Support Service for their due inspection and the deli-
very costs are payable by the “Buyer”. Said costs shall
be reimbursed if the product is proven to be effectively
non-conforming.
“TEINNOVA” will pick up and send the products to the
factory or to the nearest official Technical Assistance Ser-
vice for proper inspection. At that time, it will be deter-
mined whether the warranty will apply or it is within the
warranty exclusions. If the guarantee is applicable, the
transport, both collection at the customer’s facilities and
return of the product, will be borne by TEINNOVA. If it
is excluded from guarantee (point 2), the transport, both
collection at the customer’s facilities and return of the pro-
duct, will be borne by the customer.
“TEINNOVA” reserves the right to overrule the applica-
tion of the guarantee when there is no evidence of the

product’s non-conformity and it shall not apply said gua-
rantee until coverage has been expressly proven.
In the case that the product is covered, “TEINNOVA” can 
replace it or determine the necessary repair method.
All repair works that are carried out under the product 
guarantee must be carried out in “TEINNOVA” facili-
ties or in those of the party it designates.
The guarantee covers the materials and labour requi-
red to repair or replace the parts or elements conside-
red as defective from origin. The maximum guaranteed 
amount or value shall be the maximum price of the sale 
of the product to the “Buyer”.
Any claims made under the coverage of the guarantee 
shall not grant the right to delay and/or withhold pay-
ment of the corresponding invoice and/or any other 
pending invoices.

2.

Guarantee Exclusions: the following are excluded

from the guarantee: actions, alterations or manipula-
tions of the product that are carried out without the
prior express authorisation of the “Seller”; indirect and/
or consequential damage; damage caused by negli-
gence, by improper use or by usage that does not con-
form to the instructions and intentional damage; faults
due to adaptations made to the products or the use of
parts that were not previously and expressly certified
or authorised by the Seller; costs for detection of the
fault; costs for collection or replacement (the latter two
are unless the non-conformity is proven and within the
limits established in section 1).

Summary of Contents for Filnet B300 Ultrasonic

























Reviews: