14
CONTENTS:
Preface Page
14
System connection to the mains
Page 14
Daily time setting
Page 14
Electronic controller description
Page 15
Description of components in whirlpool
Page 15
Automatic running
Page 16
Hydro-massage
Page 16
Air-massage Page
16
Water heating
Page 17
Lighting Page
17
Disinfection, flushing and drying
Page 17
Aeration system drying
Page 18
Potential defects and their rectification
Page 18
Important safety cautions
Page 18
PREFACE:
To achieve the correct pleasure of hydro-massage bath, water in the whirlpool should be clean. Espe-
cially in cases of the systems use for commercial applications, high attention is paid to water purity and
system reliability. Among others, the system is equipped for this purpose with:
•
Disinfection agent dosing function with consequent flushing and drying of air nozzles
•
Disinfection agent container with capacity of 1.4 l
We recommend:
Before each hydro-massage bathing, observe the principles of correct hygiene. By applying this preven-
tion together with the hydro-massage system disinfection, flushing and drying functions, you will imple-
ment one of the most important measures contributing to cleanliness of the piping and walls of the
whirlpool without excessive effort and maintenance.
SYSTEM CONNECTION TO THE 230V MAINS
1)
Connect the whirlpool to the mains by turning the circuit breaker 230V/50Hz/20A on.
I)
Program version and then daily time will be displayed briefly on the controller display
DAILY TIME (clock) SETTING
1)
Depress the step push twice for a short period.
I)
The value illustrating 0 – 23 hours on the display will start flashing.
2)
Set time between 0 and 23 hours using the step pushb/-.
3)
Depress the step push twice for a short period to save the setting.
4)
Depress the step pushbutton - twice for a short period.
I)
The value illustrating 0 – 59 minutes on the display will start flashing.
5)
Set time between 0 and 59 minutes using the step pushb/-.
6)
Depress the step pushbutton - twice for a short period to save the setting.
%
%.
.
'
'à
