TeichTip SUNSUN Adjustable SuperECO CET-15000, Operation Manual

Page: 7 / 9

© by WilTec Wildanger Technik GmbH Item 50982, 51192 Page 7
http://www.WilTec.de
http://www.aoyue.eu 02 2022 -1
http://www.teichtip.de
•
Code definition and troubleshooting
Code Definition Status Solution
P000 Power Normal
― SP00 Gear Normal
FEE0 Delayed start Normal
ER05 Short-circuit current display Abnormal Check controller unit.
ER04 overheat flicker Abnormal Clean pump.
ER03 Pump works without water Abnormal
Check the pump if working without wa-
ter.
ER02 Pump block Abnormal Check the impeller if blocked.
ER01 Over-/undervoltage display Abnormal Check voltage.
Maintenance/cleaning
Please clean the filter casing, impeller, rotor, and shaft part regularly. Please cut off the power before
you clean it.
1. Turn and take off the filter casing (Fig. 1, Fig. 2).
2. Press the security clasp vertically (Fig. 3), and take off the impeller cover (Fig. 4).
3. Take off the rotor set (Fig. 5), then you can clean or change.
4. Installation position of the O-ring as shown on Fig. 6.
If the pump is not used for a long time, please run the pump in clean water for a short time. Then rinse
it with clean water. After that, dry it and keep it in a secure place.
If the temperature is below 0
℃
, the water in the pump should be discharged immediately to prevent a
freezing damage.