OPERATION INSTRUCTION
Depth of cut may be adjusted by simply turning the knob on
the front of the tool so that the pointer points the desired
depth of cut.
ADJUSTING DEPTH OF CUT
1. Pointer 2. Knob
Before installing the battery cartridge into the tool,
always check to see that the switch trigger
actuates
properly and returns to the "OFF" position
when
released.
Do not pull the switch trigger hard without pressing
the lock off lever. This can cause switch breakage.
WARNING
1. Lock-off Lever 2. Switch Trigger
To prevent the switch trigger from being accidentally
pulled,
a lock off lever is provided. To start the tool, slide
the lock-
off lever and pull the switch trigger. Release the
switch
trigger to stop.
SWITCH ACTION
1
.
For your safety, this tool is equipped with lock-off
lever which prevents the tool
from unintended
starting. never use the tool if it runs when you
simply pull the
switch trigger without pressing the
lock-off lever. Return tool a service center
for
proper repairs before further usage.
2. Never tape down or defeat purpose and function of lock -off lever.
WARNING
1. Planer blade 2. Rear base
3. Foot
To prevent the switch trigger from being accidentally pulled, a lock. off button is provided.
To start the tool, depress the lock-off button and pull the switch trigger. Release the switch trigger
to stop.
After a cutting operation, raise the back side of the tool
and
a foot comes under the level of the rear base. This
prevents
the tool blades to be damaged.
FOOT
1
2
1
2
1
2
3
15
16
