Intelligent active foam generator
14-30
o
The connection will be made by means of an electrical connnection
cable that comes with the machine. This cable features a
standard connector to mains electricity and an electrical supply
connector (blue in colour) especially for the machine. Connect
the cable to the mains electricity and then connect it to your
IFOAM MINI. The connection to your IFOAM MINI is made by
turning the blue connector to the right, as shown in the image.
Connect the hose to a mains water outlet at a minimum pressure
of 2 bar. There are adaptors for different taps which are offered
as optional accessories. Connect the hose to your IFOAM
MINI’s water input connector.
Steps to install the IFOAM correctly:
Connecting to a mains water outlet:
Connecting to mains electricity:
1
operating instructions
The temperature at which the water enters the
machine must not be greater than 80
o
C. If the
water going into the machine is greater than
80
o
C, faults can occur in the equipment’s internal
components.
2
