TEGA v2
Connect to a wireless networks
14
1. Make sure you are located within the wireless network service area. Press the Wi-Fi button to turn on Wi-Fi, and the Wi-Fi
indicator light up in blue.(If insert a 3G SIM card,and turn on 3G, you also can conncect to a 3G networks)
2. Click the network icon in the notification area, a list of available wireless networks will be displayed.
Note: WPS(Wi-Fi Protected Setup)
3. Choose a network and then click Connect. If security authentication is not required by the network you are using, there
will be a successful message showing that you have connected to the network.
(Wi-Fi hotspots and 3G networks will show up together in the same list.
Windows 7 also virtualises the Wi-Fi card so you can use it twice, for
example to connect WPS devices to a non-WPS access point.)
(To connect to some networks that require security authentication, you
may have to undergo another authorization process and enter username
and password. For details, please consult your network administrator.)
(For data security, it is strongly recommended to connect to
security-enabled wireless networks whenever possible.)
(When travelling by air, please be sure to turn off wireless networking to
avoid any possible risks to flight safety.)
