Tefcold LPD1200C/BLACK, User Manual

Page: 5 / 120

ELECTRICAL CONNECTION
The cabinet operates on 220-240 V/50 Hz.
The wall socket should be easily accessible.
All earthing requirements stipulated by the local electricity authorities must be observed. The cabinet
plug and wall socket should then give correct earthing. If in doubt, contact your local supplier or
authorized electrician.
The main electrical connections must be done by skilled electricians.
Turn on the light. Check the light under each shelf.
When turned on the first time, let it run for 2 hours to cool down the cabinet before loading products.
Do not put hot products into the cabinet, this can cause condensation.
The front glass heater should only be switched on if the cabinet is placed in high humidity. (LPD only)
START-UP OF THE CABINET
Before use, we recommend that the cabinet is cleaned, see the section on maintenance and
cleaning.
5
Important !
If the cabinet has been tilted during transport, please wait 2 hours before starting up the cabinet.
The cabinet can be placed side by side to other cabinets, just be sure that there is free airflow for the
intake at the front and the exhaust at the back.