background image

Defrosting 
 

The cooler defrosts automatically. Defrosted water runs to a container placed in the compressor 
compartment and evaporates.  
 

 

Maintenance and cleaning 

 
Switch the freezer off at the socket.  
 
The cabinet must be periodically cleaned. Clean the external and internal surfaces of the cabinet 
with a light soap solution and subsequently wipe dry. 
 
Do NOT use cleansers containing chlorine or other harsh cleansers, as these can damage the 
surfaces and the internal cooling system. 
 
Do NOT hose the compressor compartment with water as this can cause short circuits and damage 
on the electrical parts.  

 
Service 

 
The cooling system is a hermetically sealed system and does not require supervision, only cleaning. 
 
If the cabinet fails to cool, check if the reason is a power cut.   
 
If you cannot locate the reason to the failure of the cooler, please contact your supplier. Please 
inform model and serial number of the cabinet. You can find this information on the rating label 
which is placed inside the cabinet in the top right hand side.  
 

Disposal 
 

Disposal of the cooler must take place in an environmentally correct way. Please note existing 
regulation on disposal. There may be special requirements and conditions which must be observed. 

 

 

 

8

Summary of Contents for DKS95-2









Reviews: