1- STEAM IRONING
- Unplug your iron before filling it.
- Set the steam control to DRY (A).
- Take the iron in one hand and tilt it slightly, soleplate downwards (D).
- To open the water tank stopper, turn it anticlockwise until the arrow on the stopper
points to the “open padlock” symbol (B). It will lift automatically.
- Fill the tank up to the “MAX” line (D).
- Re-close the tank stopper (C).To close the stopper, align the arrow with the “open padlock”
symbol then turn it clockwise until the arrow is aligned with the “closed padlock” symbol.
- You can now plug in your iron.
Filling the water tank
Recommendations:
Fabrics and ironing temperatures:
• Your iron heats up quickly: so begin by ironing fabrics that are ironed at low
temperatures first, then go on to those requiring a higher temperature,
• if you change to a program requiring lower temperatures, wait for the thermostat light
to come on again before continuing to iron (for models fitted with the “Thermo-Alert”,
refer to the section “Thermo-Alert function”).
• when ironing fabrics with mixed fibres, set the ironing temperature for the most delicate
fibre.
For delicate fabrics we recommend testing the fabric first on an inconspicious place eg
(inside them).
• For best results we recommend you use a vented ironing board to allow the powerful
steam to penetrate through the fabric more efficiently.
• Ensure that the fabric you are ironing is flat to avoid steam venting sideways whilst
ironing.
Choose your ironing programme
Your iron has 8 ironing programmes:
A
1
2
B
D
1
2
C
• For each program corresponding to a type of textile to be ironed, your iron automatically
and precisely determines the most suitable temperature and steam flow to guarantee best
results.
• To select the appropriate ironing program, use the program selector beneath the grip (E).
- Pressing on the left side : selects the programs requiring low temperature and steam levels.
Beyond program 1, pressing the program selector has no effect.
- Pressing on the right side : selects the programs requiring high temperature and steam
levels. Beyond program 8, pressing the program selector has no effect.
- The program selected appears automatically on the indicator panel at the front of the iron (F).
- Set the steam control to steam ( )
- When your iron reaches the required temperature, the thermostat indicator goes out (G).
You can start ironing.
E
G
F
