TEFAL FV31 Series, User Manual

Page: 3 / 64

3
- Hang up the garment on a hanger and hold the fabric slightly
taut with one hand.
- Set the thermostat control on MAX (J).
- Press the Shot of steam button ( )repeatedly (K), moving
the iron from top to bottom (L).
- Hold the iron a few centimetres from the fabric to avoid
burning delicate fabrics.
FABRIC
POSITION OF
THERMOSTAT CURSOR
STEAM SETTING
POSITION
LINEN
COTTON
WOOL
SILK
SYNTHETIC
Polyester, Acetate, Acrylic, Nylon
MAX
MIN
DRY
DRY
MAX
●●●
●●
●
●
= STEAM ZONE
Recommendations:
Fabrics and ironing temperatures:
• Your iron heats up quickly: begin by ironing those fabrics that are ironed at low temperatures, then go on
to those requiring a higher temperature;
• If you turn down the thermostat, wait until the thermostat light comes back on before beginning to iron again.
• When ironing fabrics with mixed fibres, set the ironing temperature for the most delicate of the fibres.
H
- When steam or dry ironing, press several times on the Spray Button to moisten the linen (H) and to
remove stubborn creases.
- Make sure that there is water in the tank before using this button.
What temperature and which steam setting to use ?
Moistening the linen (Spray)
J
K
L
- Press the Shot of steam button from time to time (I).
- Wait a few seconds between each shot before pressing the button again.
I
Obtaining more steam for removing wrinkles
(depending on the model)
Vertical steam ironing
(depending on the model)