TEFAL EXPRESS CM410132, Manual

Page: 9 / 66

• Do not use the jug or the insulated pot over a flame or on the hob of a cooker.
• Do not pour water into the appliance if it is still hot.
• Always close the lid (a) when running the coffee maker.
• All appliances are subject to strict quality control procedures. These include actual usage tests on
randomly selected appliances, which would explain any traces of use.
• Never place your jug or your insulated pot in a microwave oven, in a dishwasher or on a cooking hob.
• Never put your hand inside the insulated pot.
• Do not use the jug or the insulated pot without their lid.
• Always place your coffee maker on a flat, stable, heat-resistant worksurface away from water
splashes and any external sources of heat.
• Do not leave the appliance unattended whilst in operation.
• Always place your appliance on a flat, stable, heat-resistant surface, away from sources of heat
and water splashes.
•
For your safety, this appliance complies with applicable standards and
regulations:
- Low Voltage Directive
- Electromagnetic Compatibility
- Environment
- Materials in contact with food
Before using for the first time
• Run the coffee maker for the first time without coffee, rinsing the circuit with 1 litre of water.
Making coffee
(Follow illustrations 1-8)
• Open the Filter holder support using the open button (g) located on the top of the coffee maker.
• Use cold water only and a No. 4 paper filter or the permanent filter. Do not use the insulated pot
without its top.
• Do not exceed the maximum amount of water indicated on the water tank level indicator.
• This coffee maker is equipped with a drip-stop feature so that you can serve a cup of coffee before all the
water has finished flowing through. Return the jug or the insulated pot to its base quickly to avoid
spillage.
• For better heat preservation, rinse the insulated pot with hot water before use.
• The lid of the isothermal coffee pot must be screwed on firmly in a clockwise direction until the
arrow on the handle is aligned with “unlock” to prepare and keep your coffee warm. To pour the
coffee, unscrew the lid by 1/2 turn until the arrow on the handle is aligned with “lock”.
• Wait a few minutes before preparing another pot of coffee.
Flavour selector
(According to model Follow illustration 9)
• The flavour selector (h) allows you to adjust the intensity of the coffee prepared.
• Turn the selector (h) to the right to the position to obtain a normal coffee, where the entire
amount of water contained in the tank passes through the coffee grounds.
• To obtain a very weak coffee, position the selector (h) to the left to the position . Only about
half of the amount of water contained in the tank passes through the coffee grounds.
• The intermediate positions on the selector (h) allow you to adjust the intensity.
For the programmable model
Indication
Program-On indicator:
The will display when you push on at “Auto-On” mode.
1-4 cups indicator:
The icon will display when you push on the
“
1-4 cups” button but will not start the brewing.
9
EN