TEFAL DV91XX, Manual

Page: 9 / 24

6
EN
DESCRIPTION
1. Water tank cover
2. Removable water tank
3. Water tank locker button
4. Temperature ready light
5. Cord protector
6. Beaker
7. Steam trigger
8. Iron rest support
9. Lint pad*
10. Fabric brush accessory*
11. Travel pouch*
BEFORE USE
Please read the instructions for use and important safeguards carefully.
• Remove any packaging from the appliance.
• Do not plug in or turn on until assembly is complete.
It is normal for a small amount of smoke and some particles rejections to be
produced the first time the appliance is used. This will quickly disappear. This product
is tested with water, some residual water may still be in the water tank.
Filling with water
Warning ! Never use 100% distilled or demineralised water as this can cause the
appliance to spit and leak.
• Your appliance has been designed to operate using untreated tap water. If your water is
very hard (check with your local water authority) it is possible to mix tap water with store-
bought distilled or demineralised water in the following proportions:
- 50% untreated tap water,
- 50% distilled or demineralised water.
Important: Heat concentrates the elements contained in water during evaporation.
The types of water listed below may contain organic waste, mineral or chemical elements
that can cause spitting, brown staining, or premature wear of the appliance: water
from clothes dryers, scented or softened water (essential oil, perfume...), water from
refrigerators, batteries, air conditioners, rain water, boiled, filtered or bottled water. Also
use distilled or demineralised water only as advised above. Never use any additives in
the water.
• Remove the water tank by pushing the locker button and slidding the water tank (Fig.1) .
• Open the water inlet cover.
• Fill the water tank to Max mark or use the cup beaker until max level
fig.2 . Make sure that
the cover is properly pushed in place and securely closed - fig.3 .
• Completely unwind the power cord. Plug in your appliance.
* depending on model