TEFAL CB7031 - 11-05, Manual

Page: 20 / 32

Connection
and pre-heating
It is essential to pour 4 litres
of water into the base of the
appliance (8) to ensure that
the barbecue works
properly.
Pour the water into the
opening (8a) provided for this
purpose at the rear of the base
of the appliance (8).
If your appliance is not equipped with
support legs (
– *11/*12/*13), place it on
a stable heat resistant surface.
Do not use it on a flexible type of support,
such as a rubberised protective cloth.
Never place the appliance directly onto a
fragile surface (glass table, cloth, varnished
furniture...).
To avoid overheating of the appliance, we
recommend you do not place it in a corner
or against a wall.
Unwind the cord completely.
Check that your electrical installation is
compatible with the power and the voltage
indicated under the appliance.
You should regularly examine the power
supply cord so as to detect any signs of
wear. Do not use the appliance if the cord is
damaged.
If the power supply cord is damaged, it
must be replaced by the manufacturer or its
service agent or a similarly qualified
person in order to avoid any danger.
Connect the appliance to a socket with an
earth connection.
Supply the appliance through a residual
current device (RCD) having a tripping
current not exceeding 30 mA.
E
D
D
GB
20
If an extension cord is used:
- it must be with an incorporated earth
connection;
- take every precaution to ensure that
people cannot become caught up in it.
Plug the cord into the mains.
Never plug the appliance in when not in
use.
Never use the appliance when it is empty.
Never use the appliance with the protection
lid (2) closed.
Set the thermostat to the Maxi position.
Leave to pre-heat the appliance for
10-15 minutes.
On first use, the appliance may smell slightly
and possibly give off smoke for the first few
minutes – this is normal.
Never leave the appliance unattended when
in use.
WARNING: do not use charcoal or any other
combustible material in the appliance.
Cooking
After pre-heating, the appliance is ready to
be used.
Set the thermostat to the position of your
choice.
Leave to cook depending on your taste.
Ensure that there is always water in the
base during the use of the appliance.
If water needs to be added
during cooking, pour it into the
opening (8a) provided for this
purpose at the rear of the base
of the appliance (8).
Do not touch metallic parts while the
appliance is on as they are very hot.
Do not cook food in tinfoil.
Never place aluminium foil or anything else
between the grill plate and the food to be
cooked.
D
D
Grill'n Pack plaque 11/05 24/11/05 15:02 Page 20