11
STEP 6
Assemble Handles and Hinge Covers
The 700ia is shown here. Your actual model may vary.
FIGURE 21
FIGURE 22
• Locate the Handle Assembly Hardware Kit (HK1009).
• Insert the left and right handles into the A-Frame (Figure 21) so the
long part of the handles are parallel with the rear legs of the A-Frame.
• Insert the Bolts from inside of the A-Frame and fasten with the Nuts
from the outside of the A-Frame (Figure 22).
• Tighten with the open-ended wrenches provided.
• Locate the Hinge Cover Assembly Hardware Kit (HK1002).
• Select the corresponding Hinge Covers for the left and right sides of
the A-Frame by aligning each with the shape of the Hinge Plate
(Figure 23).
• Secure with (2) Allen Head Bolts for each side using the 5 mm Allen
Wrench provided. Be careful not to overtighten.
FIGURE 23
