Teesa TSA8070, Owner'S Manual

Page: 12 / 44

12
Owner’s manual
EN
1 2 3 4
5
6
TSA8070 TSA8071
1 6
2
3
4 7
OPERATION
Battery installation
1. Turn around the device, with the display facing down.
2. Push the battery compartment cover marked with the arrow.
3. Slide the battery compartment cover to the side.
4. Slide the batteries with correct polarization.
5. Close the battery compartment cover.
Taking measurements
1. Slide a finger (index or middle) to the device from the side. Slide your finger all the way, so
that it rests on the sensor.
2. Place your hand on flat surface.
3. Press the turn on button. After a while, the measurement will start.
• To change the orientation of the screen, press the turn on button again.
• To turn off the sounds, press the turn on button twice.
4. After finished measurements, take your finger out of the device. The device will shut down
after 8 seconds from taking out a finger from the device.
Note:
• Do not take measurements if the temperature of the user exceeds 41°C.
• The factor that can affect measurements negatively are: nail polish, nail extenders, lotions, etc.
• To ensure that the measurements are accurate, do not move your finger placed in the device.
• If the device turns off while measuring, replace the batteries.
• Measurements may be conducted every 10-15 minutes.