Teesa TSA8023, Owner'S Manual

Page: 11 / 28

Owner’s manual 11
EN
1. Fit the stand into the base, then use the supplied screws to fix them.
2. Place the rear guard on pillars on the motor housing and fasten it with guard
mounting nut. Make sure the rear guard is closely mounted to the motor
housing.
3. Place the blade on the fan axle and fasten the spinner to affix the blade.
4. Put the hook of the front guard ring on the top of the rear net. Put the
rear net into the front guard ring to make them tally completely. Tighten
the fastening screw at the lower end of front guard.
OPERATION
MOUNTING
1. Place the fan on a flat stable surface.
2. Make sure none of the speed button is pressed.
3. Plug the fan into power mains.
4. Press one of the speed buttons to control air outlet: 1 - low, 2 - medium,
3 – high. Press 0 button to turn the fan off.
5. To control oscillation press/pull the oscillation button.
6. Tilt the head up or down to the required position.
SPECIFICATION
CLEANING AND MAINTENANCE
• Prior to cleaning, disconnect the device from power mains.
• Clean this device with soft, slightly damp cloth. Do not use any chemical
agents to clean the fan.
• Dry the fan with a dry cloth after cleaning.
FUNCTIONS
3 speed modes
Automatic oscillation: 90°
Adjustable tilt angle
Metal blade guard