Teesa TSA8022, Owner'S Manual

Page: 11 / 28

Owner’s manual 11
EN
1. Fix the rear guard (6) on the motor housing (8) with rear guard screw (5).
2. Screw down the blade (4) onto the fan axle (7) with blade screw (3).
3. Fasten the front guard (2) and rear guard (6).
4. Insert the speed buttons housing (10) into the height adjustment pipe
(13) and screw it down with screw (12).
5. Fix the cross base (18) and the stand (15) with four cross base screws (17)
and put the base cover (16) onto the base.
OPERATION
MOUNTING
1. Place the fan on a flat stable surface.
2. Plug the fan into power mains.
3. Press one of the speed buttons to control air outlet: 1 - low, 2 - medium,
3 – high. Press 0 button to turn the fan off.
4. To control oscillation press/pull the oscillation button.
5. When you want to adjust the height of the fan you can loosen the pipe
nut and adjust the pipe to the desired height and then fasten it.
SPECIFICATION
CLEANING AND MAINTENANCE
• Prior to cleaning, disconnect the device from power mains.
• Clean this device with soft, slightly damp cloth. Do not use any chemical
agents to clean the fan.
• Dry the fan with a dry cloth after cleaning.
FUNCTIONS
3 speed modes
Automatic oscillation: 90°
Adjustable height: 105-123 cm
Adjustable tilt angle
Metal blade guard