Teesa TSA3538, Owner'S Manual

Page: 10 / 36

Owner’s manual 10
EN
2. Screw the blade assembly into the cup. Make sure the blade assembly is properly
screwed on the cup. Note that the ingredients amount should not exceed the indicated
maximum capacity of the cup.
3. Turn the cup upside down. Line up arrow on the blade assembly with the open padlock
on the base. Place the cup on the base and simply turn the cup clockwise until the arrow
lines up with the closed padlock.
4. Plug into power supply socket. Make sure the voltage indicated on this device matches
power supply voltage.
5. Press the power switch, the blender starts working. If the blending cup and the motor unit
are not locked, the blender won’t operate.
6. Do not run the blender continuously for longer than 3 minutes. Switch off and let it rest
for the motor to cool down before starting again.
7. After use, unplug the appliance
from the mains. Spin out the cup
counterclockwise.
8. Spin the blade assembly out.
Reminder: turn off the device when
blending is complete. Do not run the
device without any food inside the unit
as this could overheat the motor