Teesa TSA0800, Owner'S Manual

Page: 11 / 32

Owner’s manual
11
EN
INSTRUCTION OF USE
1. Remove the cover from the battery compartment and insert
3 x 1,5 V AAA batteries. Make sure the batteries are inserted in
accordance with indicated polarity.
2. Replace the cover.
3. Remove the protective cover and place the required roller in
the appliance.
4. Press the safety button and push the on/off button up to turn
the appliance ON.
5. Place the roller against your skin and glide the device gently
over the area to be treated.
6. Check to see if you have achieved the softness you desire.
If not, go over the area for 2-3 more seconds and check again.
Continue to use this method until the level of smoothness
is obtained.
7. Turn the unit off.
8. Rinse the skin or use a wet towel to get rid of dead skin.
9. Remove the roller and clean the appliance.
10. Keep the protective cover on your unit when it is not in use.
CHANGING THE ROLLER
1. Hold the roller.
2. Push the release button upwards, and tip the holder outwards.
3. Pull the roller out.
4. Insert a new roller.
5. Make sure the new roller has been assembled correctly.