teenage engineering OP-Z1, User Manual

Page: 18 / 59

User Guide - 2.5 Track
Teenage Engineering
– User Guide (LD)
Janvier 2019
18/59
2.5 Track
2.5.1 T
RACK INTRODUCTION
18
2.5.2 T
RACK PARAMETERS
18
2.5.3 S
TEP COUNT
19
2.5.4 S
TEP LENGTH
19
2.5.5 O
FFSET NOTES
19
2.5.6 S
ELECT PLUG
/
PRESET
19
2.5.7 R
ANDOMIZE PRESET
19
2.5.8 S
TORE PRESET
20
2.5.9 K
ILL TRACK NOTES
20
2.5.10 L
INK
/
UNLINK TRACKS
20
2.5.1 Track introduction
The track select button, or TRACK , is an important button with a lot of functionality. Its main use
is for selecting tracks, for setting track and note length, and for working with presets.

Usually press and hold TRACK to access its features. (for example to adjust quantize or
Portamento)
2.5.2 Track parameters
note length
Note length controls
the duration of notes
that are of default
note length. All other
notes remain
unaffected
Hold TRACK and turn
the green dial to set
note length from 1/64
notes to a whole bar
Turning all the way to
the right enables
drone mode note style
Note style is set using
TRACK together with
the blue dial.

settings for
drum tracks:

Retrig

gate

loop
Settings for synth
tracks:

poly

mono

legato
quantize
Quantize live recorded
notes by holding
TRACK and turning the
yellow dial.
(Quantization amount
per track, from 0 – 100
%)
Portamento
Portamento adds glide
between notes.
Hold TRACK and turn
the red dial to adjust
Portamento.
o
0 is no Portamento
o
100 is very slow