F
R
A
N
Ç
A
I
S
E
S
P
A
Ñ
O
L
®
Teel Professional Self-
Priming Centrifugal Pump
Operating Instructions & Parts Manual
4RJ40, 4RJ41, 4RJ42, 4RJ43 and 4RJ44
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Form 5S4195
®
E
N
G
L
I
S
H
Printed in U.S.A.
09319
0600/225/E3
Unpacking and Inspection
Handle with care. Check items received
against packing list to be sure that all
equipment has been received. Inspect
for shipping damage. If found, file
claim with carrier immediately.
General Safety Information
READ AND FOLLOW
SAFETY INSTRUCTIONS!
This is the safety alert symbol.
When you see this symbol on your
pump or in this manual, look for one of
the following signal words and be alert
to the potential for personal injury.
Warns about
hazards
that will cause serious personal injury,
death, or major property damage if
ignored.
Warns about
hazards that can
cause serious personal injury, death, or
major property damage if ignored.
Warns about
hazards that will
or can cause minor personal injury or
property damage if ignored.
NOTE:
Indicates special instructions
which are important but not related to
hazards.
Carefully read and follow all safety
instructions in this manual and on
pump.
4RJ40
Fiberglass Reinforced Thermoplastic
Engineered Polymer
Viton†
Polypropylene
4RJ41
Fiberglass Reinforced Thermoplastic
Engineered Polymer
Viton†
Polypropylene
4RJ42
Fiberglass Reinforced Thermoplastic
Engineered Polymer
Viton†
Polypropylene
4RJ43
Fiberglass Reinforced Thermoplastic
Engineered Polymer
Viton†
Polypropylene
4RJ44
Fiberglass Reinforced Thermoplastic
Engineered Polymer
Viton†
Polypropylene
Specifications
Model
Pump Body
Impeller
Seal
Diffuser
4RJ40
2”
2”
230
2
1
/
2
1
25 ft.
12
3
⁄
8
”
6
9
⁄
16
”
21”
64 lbs.
4RJ41
1
1
⁄
2
1
1
⁄
2
115/230
1
1
20
11
13
⁄
16
6
9
⁄
16
18
5
⁄
8
46
4RJ42
1
1
⁄
2
1
1
⁄
2
115/230
1
1
/
2
1
20
11
13
⁄
16
6
9
⁄
16
19
3
⁄
4
50
4RJ43
2
2
230
2
1
25
12
3
⁄
8
6
9
⁄
16
21
59
4RJ44
1
1
⁄
2
1
1
⁄
2
115/230
3/4
1
20
11
13
⁄
16
6
9
⁄
16
18
5
⁄
8
44
Dimensions
Port Size
Volts @
Motor
Maximum
Dimensions
Model
Inlet
Outlet
60 Hz.
HP
Phase
Suction
Height
Width
Length
Wt
Description
Teel self-priming to 20 ft., corrosion-resistant centrifugal pumps Model Numbers
4RJ40, 4RJ41, 4RJ42, 4RJ43, and 4RJ44, are for use in commercial irrigation, water
transfer, draining, and general de-watering applications. Specially fitted to be
resistant to brine or salt water. Pumps from ponds, cisterns, or well points.
Maximum suction lift is 20 to 25 ft. (See Table below). Discharge can be divided to
supply 2 or more systems. 3/4, 1, 1
1
⁄
2
HP models have dual voltage motors for
115/230 volt operation. 2 HP and 2
1
⁄
2
HP models are 230 volt. Discharge pressures
range from 10 to 50 psi, flow rates from 7 to 92 GPM.
For use with non-flammable liquids compatible with pump component materials.
(†) Seal has ceramic seat, carbon head, and stainless steel spring.
3691 0400
L17
6-35P
Figure 1
