TeeJet SmartPad II, User Manual

Page: 162 / 198

4-32 Chapter 4 - Waypoint Navigation
Nav 2 Point Real-Time Scenarios
SmartPad II
Software Version 4.02
Adding the Start Navigation Button
This example also defines a special case. When the operator initially starts the Nav 2 Point application there are no
existing points; therefore the Start Navigation button is not placed in the button bar, Figure 4 -36. Once the operator
added the first sample point, the Start Navigation button is placed in the button bar (Figure 4 -37#, and will remain in
the button bar unless the operator deleted all sample points in the Point/Grid file.
Figure 4-36: Marking the Sample Point and Entering A Sample Name
Figure 4-37: Adding Sample Point Completed.
Figure 4-38: Icons Used in this Example