TeeJet SmartPad II, User Manual

Page: 66 / 198

3-12 Chapter 3 - Real-Time Guidance
Guidance Setup
SmartPad II
Software Version 4.02
GPS Data Rate
Data rate allows you to select between 5 Hz and 1 Hz position data rate. This is for user’s who have a
GPS receiver that only sends data at 1 Hz. Operating guidance at 1 Hz is not recommended, you will
see degraded guidance performance when running in this mode.
To change the Data Rate setting; highlight the GPS Data Rate menu item and press . The Data Rate dialog box
will appear. Select 1Hz or 5Hz. Then press to return back to the Guidance setup menu.
Figure 3-13: The GPS Data Rate Menu Item
Setting Description
1Hz Selecting 1 HZ allows you to run guidance at a one
You GPS receiver must be set to 1 Hz as well.
5Hz Selecting 5 HZ allows you to run guidance at a one Hertz
data rate. Your GPS receiver must be set to 5 Hz. This is the
default setting.
Table 3-4: GPS Data Rate Settings