DynaJet® IC7140
www.teejet.com
6
1
2
3
4
5
6
7
8
9
A
CHAPTER 1 -
INSTALLATION & UPDATING
DynaJet IC7140 installation includes eight (8) output driver options where each driver consists of eight (8) nozzle harnesses and is tailored to the
customer’s specific equipment.
DYNAJET IC7140 ECU
The DynaJet IC7140 controller works in conjunction with an existing
rate controller to achieve a target application rate while maintaining
target droplet size(s) when a speed change occurs.
The DynaJet IC7140 controller changes flow output to each individual
nozzle based upon input provided from the operator about the
optimum droplet size (target pressure) for the application.
Figure 1-1:
DynaJet IC7140 Controller
Item
Description
1
Pressure Interface Harness connector
NOTE: A pressure interface harness may not be included
in all configurations. When not in use, use the
provided cap to enclose this connector port.
2
DynaJet IC7140 ECU Main Harness connector
3
Product and serial number label
4
Mounting tabs
5
Programming Port
NOTE: Verify the unit is secured with the four mounting screws before
using the DynaJet IC7140. Keep magnetic and electromagnetic
devices away from the DynaJet IC7140 system. Mounting the
DynaJet IC7140 system in areas of high vibration can adversely
affect the system operation. It is highly recommended to mount
directly to the vehicle’s main frame or to something directly
connected to the main frame.
Figure 1-2:
DynaJet IC7140 ECU Top and Bottom Views
Software Updates
As TeeJet Technologies continues to enhance its software, updates for the console will be made available at
Update Instructions bulletin 98-01571 at the end of this chapter for details and instructions.
Summary of Contents for DYNAJET IC7 140
Page 1: ...DYNAJET IC7140 INSTALLATION SETUP USER MANUAL 98 05347 R1...
Page 73: ......
