Stand 21.08.2019
20
ENG
LIS
CH
AIR CURTAIN CONFIGURATION
The name and fundamental settings for each individual device can be changed in this section.
Name
Change the name of the device
Fan model
Information about AC or EC technology
Automatic speed control
Select between:
Off
Manual speed specified by the control
element
T-outdoor Fan level regulated by outdoor temperature
T-room Fan level regulated by room temperature
Infrared Fan level by IR sensor (special function)
0-10 V External signal specifies fan level
4-20 mA Alternative to 0-10 V, identical function
Electronic air discharge temperature control
Mixer movement duration Valve run time [s]
Air discharge temperature control reinforcement Kp Proportional control parameter
[%]
Air discharge temperature control reset time Tn Integral control parameter [s]
Mixer closed when off On or off
Group assignment
ROOM SENSOR SELECTION
Options for recording the room temperature.
Internal sensor display
Sensor in control element is active
External sensor device
PT 1000 sensor connected as external sensor
External thermostat device
Room thermostat / switch connected
ALIGNMENT OF ROOM SENSOR
The display value can be calibrated here when there is a significantly different room temperature.
ACTIVATE THE SUMMER / WINTER FUNCTION
Switch the summer / winter function on or off. If this is switched on, you can select between
summer and winter function on the home screen. If the function has been switched off, a symbol
is no longer shown on the home screen.
AUTOMATIC SUMMER / WINTER CHANGEOVER
Off
No automatic switchover
T-outdoor
Switch from summer to winter using an external sensor
Ext. input
Switch from summer to winter using an external contact
