7
8. FUNCTIONAL DESCRIPTION switches and DIAL
1. Display
2. The LED power
3. indication of improper operation
4. Welding current regulator
5. The pulse frequency adjustment knob
6. The adjustment knob downslope
7. The knob functions ARC FORCE (MMA) / powypływu gas
(TIG)
8. Slot "+"
9. Nest "-"
10. The seat of protective gas
11. Socket control TIG
Button 12. pulsator
13. Key control the source (two-stroke engine /
czterotakt)
14. Key selection of welding method
15. Main switch
16. Power Cord
17. nipple shield gas connection
18. fan
8.1. Protection against overheating
IGBT module is protected against overheating by installing protective welding machine which turns off the power. When the temperature of the welding
device is too high, the security disconnects the welding current and the LED will overheat indicator (2). After a few minutes, the cooling device to a
temperature permitting continued operation. There should at that time interrupt the power supply, since the continuously operating fan cools the heat
sinks inside the unit to more quickly reduce the temperature. After falling temperature will automatically reset the circuit breaker. After restarting, be sure
to limit the welding parameters for further continuous operation.
9. PARAMETERS
9.1 MMA
During the MMA welding can adjust the welding current and the function button ARC FORCE method of welding (14) to select the method
of MMA (
)
. Knob (4) to the desired
value of the welding current and the knob (7) to FORCE function value ARC.
welding current
Range: 10 - 180A
