5.How to play
1)Insert operated coins.
2)Turn the stick to the target point within 25 seconds.
3)Press and hold the "up" button to raise up the stick.
4)When raising up to the target point, loosen the "up" button to thrust the stick into the point.
5)When crossing the point and thrust out the gift, then you got it.
Determine the origin of test mode
Before operation, machine is to be passed the TEST MODE 6
Firstly enter Mode 6: press “MENU” button, means enter Mode 6 when the LED6 light on.
1.
In the Mode 6, press "ENTER" button, the rod will automatically move to the first lattice ,then rise
and go through the first hole.(The rod can be forced to move if it do not move. )After that, continue to
rise the rod and push forward into next hole. Finish setting six lattices (if cannot pass this test, then
please enter Mode 5 to continue adjusting), the rod will automatically go back to its place.
6. Illustration of main-board's function
1.LED 1: mode 1 (as the pic shown above)
2.LED 2: mode 2 (as the pic shown above)
3.LED 3: mode 3 (as the pic shown above)
4.LED 4: mode 4 (as the pic shown above)
5.LED 5: mode 5 (as the pic shown above)
6.LED 6: mode 6 (as the pic shown above)
4
LED1——LED7
LED1 - LED8
