19
Re-torque starter mounting bolts to 80÷90 inch lbs (9.0÷10
Nm).
NOTE - If it is necessary to replace either the starter
pinion and/or the flywheel due to damaged teeth, it is
essential that the starter pinion to flywheel ring gear
mesh is checked on re-assembly. The correct mesh is
1.5 mm (1/16”) between the head of the pinion gear tooth
and the base of the flywheel gear tooth. Correct
adjustment can be accomplished by de-forming the
starter mounting bracket accordingly.
Fig. 34
www.mymowerparts.com
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
