3
UNIVERSAL BAR DIAM.80
FANS SAFETY REGULATIONS
ATTENTION:
Read the manual carefully before starting to use the fans. Keep the instructions for future reference.
Do not touch/disassemble the bar or the fans while they are in operation: RISK OF INJURY.
The product must be installed in a place with access limited to qualified personnel only. Any work on the equipment
must be entrusted to a qualified engineer.
Do not touch the motor or the power cables. Contact with a voltage of 120/230 Vac can be fatal. To reduce
the risk of electric shock, do not dismantle or modify the fan motor for any reason.
Before connecting the system to the power supply, make sure that all the connections are correct.
Always
disconnect the fan from the power supply before performing any type of maintenance.
Never touch the motor, danger of burns: RISK OF INJURY.
POWER SUPPLY
Before using it, always make sure the power cable is not damaged, knotted or pinched.
Do not tamper with the power cable. Never disconnect the unit by pulling the cable and avoid touching the pins. Do not
carry out any operations of connecting/disconnecting with wet hands. To disconnect the system, do not use objects
such as levers. Immediately disconnect the power supply if it is evident that the system is giving off a smell of burning or
smoke and contact the Tecsystem technical assistance.
LIQUIDS
Do not expose the product to dripping or splashing liquids. Do not place in places with humidity over 90% and never
touch with wet or damp hands.
CLEANING
Before cleaning the fan, always disconnect the power cord. To avoid malfunctions only use compressed air to remove
dust and dirt. Do not use lubricants or greases of any kind.
OBJECTS
Never insert objects into the air inlet or outlet If this happens disconnect the fan and contact a technician.
USE RESERVED TO QUALIFIED PERSONNEL
The purchased product is a sophisticated electro-mechanical device that must never be used by non-qualified
personnel. Any work must be carried out by a specialist engineer.
ACCESSORIES
Do not use non-original accessories or spare parts as this could cause damage to the fan and endanger the user. In
case of faults, contact technical assistance.
LOCATION
Install the fan indoors in a place protected from w
ater splashes and from the sun’s rays. Do not place near heat sources
exceeding the parameters stated in this manual. Place horizontally and on stable surfaces. The product must be
installed in a place with access limited to qualified personnel only.
REPAIRS
Do not repair or modify the fan yourself. For any fault, always use qualified personnel. Opening or tampering with the
fan automatically invalidates the warranty.
PRODUCTION
The date and the production batch of the product are shown on a label placed on the fan.
Removal of the label
automatically invalidates the warranty.
TECHNICAL OR REPORTING INFORMATION
Mail:
