TecSup 80300106 J, User Manual

Page: 26 / 44

BABY
TECSUP – BABY – Users manual - 80300106 J – P 25 / 41
9 / SAFETY STEPS
• The 110/230 VAC mains grid (or generator) being used as a power
source for BABY must be protected by a properly calibrated differential
trip switch.
• Access to the electronics and battery pack is protected by
a non standard screw.
• Do not use the lamp in environments where a risk of
explosion mayoccur or near solvents, gases or inflammable dusts.
• Never shine a LED light into the eyes ; the power given off
could cause temporary or permanent damage.
• In extreme conditions of use, the maximum temperature of the
dissipater can reach 65°C approximately; without being dangerous,
nevertheless, making children aware would be wise.
• It is advised to keep the protective caps on the connector points
when they are not being used; the life of the electric points will be
prolonged further.
10 / SPARE PARTS
The following list of spare parts is neither exhaustive nor contractual.
• External glass screen (see #7)
• Mains power cables with standards such as UK, Europe, CH,
Italy, etc.
• Cigarette lighter cable
Cord change requires no action on the BABY product: independent
product.
If the external flexible cable or cord of this luminaire is damaged, it
must be replaced by a cable or a special cord from the manufacturer or
its maintenance service.