Tecsis P3230, Operating Instructions Manual

Page: 23 / 28

BD_BE 725
23
Betriebsanleitung/Operating instructions
Speciications Model P3230 / P3233
CE- conformitiy
„
EMC directive
2004/108/EEC, EN 61 326 Emission (Group 1, Class B) and Immunity
(industrial locations)
Wiring protection
„
Short-circuit proofness Sig+ towards UB-
„
Reverse polarity protection UB+ towards UB-
{Lightning protection
EN 61000-4-5; 1,5J}
Weight kg
„
Level probe Approx. 0.18 Approx. 0.20
„
Cable Approx. 0.08 Approx. 0.08
„
Additional weight Approx. 0.50 Approx. 0.50
Functional test
„
Observe the ambient and working conditions outlined in section 7 „Technical
data".
„
Please make sure that the pressure transducer is only used within the over-
load threshold limit at all times!
The output signal must be proportional to the pressure. If not, this might point to a
damage of the diaphragm. In that case refer to chapter 10 „Troubleshooting“.
7. Starting, operation / 8. Maintenance, accessories
GB
{ } Items in curved brackets are optional extras for additional price.
8. Maintenance, accessories
„
tecsis pressure transducers require no maintenance.
„
Have repairs performed by the manufacturer only.
!
Warning