P. 14
Tecshow Navigator 3+ |
18. MIDI CHANNEL SETTING
Set MIDI Channel
1. Press and hold down the Midi button for 2 sec-
onds or until the LED-display displays “In:XX”.
“:XX” represents the current set midi channel.
2. Use UP/DOWN BANK buttons to set your desired
Midi channel from 01 to 16.
3. Press and hold down the MIDI button for 2 sec-
onds or until all LED´s flash three times to save
your setting.
MIDI Control
This unit can receive MIDI data to trigger or activate
Banks 1-30, Chases 1-12 and the Blackout function.
See Midi chart below.
By fixture 1-13, Scene 1-13, Chase 1-13 and Fade
Time Slider, the Navigator 3+ can function as a
simple MIDI controller. The MIDI control function
are falls into 10 pages. The following diagram is the
details:
MIDI Note
Function
0-11
Turn on/off Chase 1-12
12-19
Turn on/off Scene 1-8
20-49
Select Bank 1-30
50
Enable/disable Audio
51
Enable/disable Auto
52
Enable/disable Blackout
Page
Chase 1-12
Scene 1-12
Fixture 1-12
Slider 1-8
Slider 9-16
1
Note 0-11
Note 12-19
Note 20-31
CC 0-7
CC 8-15
2
Note 0-11
Note 12-19
Note 32-43
CC 16-23
CC 24-31
3
Note 0-11
Note 12-19
Note 44-55
CC 32-39
CC 56-63
4
Note 56-67
Note 68-75
Note 76-87
CC 48-55
CC 56-63
5
Note 88-99
Note 100-107
Note 108-119
CC 64-71
CC 72-79
6
Note 88-99
Note 120-127
Note 108-119
CC 80-87
CC 88-95
7
Note 08-19
Note 0-7
Note 20-31
CC 96-103
CC 104-111
8
Note 40-51
Note 32-39
Note 52-63
CC 112-119
CC 120-127
9
Note 64-75
Note 76-83
Note 84-95
CC 0-7
CC 8-15
English version
