TECshow NAVIGATOR 2, User Manual

Page: 8 / 28

P. 8
Tecshow Navigator 2 | English version
from a single channel fader. See Creating A Fader
for more information.
Fader reversal changes the order of the DMX values
sent out as the channel fader moves. In normal
mode a channel fader sends out a higher DMX
value as it moves upward, sending out the value 0
at the bottom and 255 at the top. When a fader is
reversed, it sends out the value 255 at the bottom
and 0 at the top. See Creating A Fader Reversal for
more information. The fader LEDs indicate when a
fader has been customized or reversed.
Physical Fader Assignment
(optional setup)
Use this feature to combine or unify fixture control
attributes for different fixtures. For example; if you
were controlling 4 moving mirrors and 4 moving
yokes, the color, gobo and dimmer channels may
not line up ideally on the physical faders. Use this
function to re-assign the dimmer, color and gobo
channels to faders 1, 2 and 3. From now on you will
be able to control the same attributes on all fix -
tures using the same fader location.
1) Press and hold
PROGRAM & TAPSYNC buttons
together (1) time to access the channel assignment
mode.
2) Press a
FIXTURE
button that represents the fix -
ture whose faders you would like to re-assign.
3) Move the SPEED fader until you arrive at control-
ler channel (number).
4) Move the
FADE TIME
fader to select the DMX
channel.
5) Press the MIDI/ADD button to confirm setting.
6) Repeat steps 3 ~ 5 as often as necessary. If you
wish to copy a fixture ’s physical assignments to
another fixture , continue by following steps 7-13.
If you do not wish to do this, press and hold PRO-
GRAM & TAPSYNC buttons (2) times to exit mode.
Example: Copying FIXTURE 1 into FIXTURE 2
7) Press and hold FIXTURE button # 1.
8) While holding button # 1 press FIXTURE button # 2.
9) While holding FIXTURE buttons # 1 and # 2, press
and hold
MIDI/ADD
button.
10) Release FIXTURE button # 1 first before releas -
ing FIXTURE button # 2.
11) Release MIDI/ADD button.
12) All
FIXTURE
LED indicators will flash to confirm
successful copy.
13) Press and hold PROGRAM & TAPSYNC buttons
(2) times to exit mode.
Reverse Channel Output
(optional setup)
1) Press and hold
PROGRAM & TAPSYNC
buttons
together (2) times to access the channel assignment
mode then press the FIXTURE button.
2) Move the SPEED fader until you arrive at the
controller channel you wish to alter.
3) Move the FADE TIME fader all the way up until N
changes to Y. If you wish to copy a fixture’s reverse
channel assignments to another fixture , continue
by following steps 4-10. If you do not wish to do
this, press and hold PROGRAM & TAPSYNC buttons
(1) times to exit mode.
Example: Copying FIXTURE 1 into FIXTURE 2.
4) Press and hold FIXTURE button # 1.
5) While holding button # 1 press FIXTURE button # 2.
6) While holding FIXTURE buttons # 1 and # 2, press
and hold
MIDI/ADD
button.
7) Release FIXTURE button # 1 first before releasing
FIXTURE button # 2.
8) Release MIDI/ADD button.
9) All
FIXTURE
LED indicators will flash to confirm
successful copy.
10) Press and hold PROGRAM & TAPSYNC buttons
(1) times to exit mode.
Fade Time Assign (optional setup)
You can choose whether the board’s fade time dur-
ing scene execution is implemented broadly to all
output channels or only to the Pan and Tilt move-