DMX addressing
The device is controlled by universal DMX 512 protocol, DMX
address is the start channel used to receive instructions from
the external controller. For independent control, each fixture
must be assigned its unique address control channels. For
example, this device has four channel modes: 20/24/14/16,
if we set the mode at standard 20 channels mode, and there
are several models need to be independently controlled, we
just simply address first fixture at 1, and second fixture at 21,
third one at 41, etc.
If the devices have the same address, they will behave syn-
chronically.
DMX addressing is limited, don’t set the address so high that
without enough control channels for the fixtures.
Connection: us DMX cable with 3+5 pin XLR-plugs to connect
the controller with the fixture or one fixture with another.
p. 14
ION 280 3 IN 1
ENGLISH VERSION
