P. 7
- Tecshow Halo 80 LED
English Version
Panwheel Step
When walking in the positive direction, the
step value should increase, when going back,
The step value should be reduced. The value
is the same every time you go to a certain
point.
Tiltwheel Step
System Error
(See common mistakes Rear)
If the red ERR indicator is lit, the luminaire is
running.
An error can be made by going to the sub-in-
terface for details.
After viewing, you can press the “Clear” but
-
ton to clear the error record.
DMX Monitor
This enters the sub-interface and displays
the channel values as values for viewing.
Error
Description
MT board connection failed
The driver board did not respond. Serial communication line connect-
ing display panel and driver board.
There is a problem, or there is a problem with the driver board.
Pan Reset failed
X-axis photoelectric switch, or problem with X-axis motor
Tilt Reset failed
Y-axis photoelectric switch, or problem with Y-axis motor
Pan Hall failed
Pan Hall have problem
Tilt Hall failed
Tilt Hall have problem
Color Wheel Reset failed
Color Wheel Hall , or Color Wheel motor have problem
Gobo Wheel Reset failed
Gobo Wheel Hall , or Gobo Wheel motor have problem
Focus Reset failed
Focus Hall , or Focus motor have problem
DMX Channel Table
CH
Channel Mode
16CH
20CH
1
Pan
Pan
2
Pan Fine
Pan Fine
3
Tilt
Tilt
4
Tilt Fine
Tilt Fine
5
Dimmer
Dimmer
6
Strobe/Shutter
Strobe/Shutter
7
Color Wheel
Color Wheel
8
Gobo Wheel
Gobo Wheel
