P. 5
- Tecshow Halo 80 LED
English version
19CH.Dimmer-Prism-Frost
Speed
0-255
20CH. Gobo Wheel Speed
0-255
Setting
(1)Yellow arrow
indicates selected
(2) Press “OK” key enter into
Edit status, the word is red,
then press “UP” “DOWN” to
select, press “OK” save and Exit
edit status.
Option
Description
Run Mode
DMX
Slave status: Receive DMX signals from the console or
Master
AUTO 1
Auto run ;
AUTO 2
Master status: Auto run and send DMX signal to slave
Random
Sound
DMX Address
001-512
Press “OK” key enter into edit status, then press “UP”
“DOWN” to change DMX address. press “OK” key save and
exit edit status.
Channel Mode
16 CH
Standard 16 Channel Mode, 17-20CH No Function
20 CH
Extend 20 Channel Mode, 17-20CH for speed control (please
check the detail on Channel table.)
Invert Pan
OFF
ON for starting and ending , the default is OFF.
ON
Invert Tilt
OFF
ON for starting and ending , the default is OFF.
ON
Pan-Tilt Swap
OFF
ON
Exchange Pan/Tilt channel (include Pan/Tilt Fine)
Pan-Tilt Encoder
ON
Use encoder (optocoupler) to determine out of step and
automatically correct position
OFF
Correct position without encoder (optocoupler)
DMX Signal
KEEP
Continue running as it is
CLEAR
All motors return to the position and stop running.
