FLATSIX - LED PAR LIGhT
ENGLISH VERSION
p. 7
Section 3. Troubleshooting
Probable cause(s)
Remedy
No response from fixture
when power is applies
No power to fixture
Check power cables
Primary fuse blown
Replace fuse
Secondary fuse blown
Replace fuse
Fixture resets but does
not respond correctly to
controller
(DMX mode operation)
Controller not connected
Connect controller
Incorrect addressing of the fixtures
Check address setting on fixture and controller
Bad data link connection
Inspect cables and correct poor connections and/or
broken cables.
Conflict between tracking and vec-
tor control
Eliminate scene cross-fade on controller
Data link not terminated
Insert termination plug in output of last fixture
Defective fixture or 2 devices trans-
mitting on link
Bypass fixtures one at a time until normal operation is
regained:unplug both connectors and connect them
directly together
Colors cannot be mixed
Random color mixing is on
Turn off random color mixing
Fixture does not reset
correctly
Electronic or mechanical failure
Contact service technician
No light, lamp cuts out
intermittently,or burns out
too quickly
Lamp missing or blown
Disconnect fixture and replace lamp
Fixture or lamp is too hot
Allow fixture to cool. If problem persists, contact service
technician
