FLATSIX - LED PAR LIGhT
ENGLISH VERSION
p. 4
Safety Instruction
•
Please conserve this manual as operation guidance. If
you sell this product to other user, please make sure that
they also receive this user manual.
•
Always make sure that you are connecting to the proper
voltage and that the line voltage you are connecting to is
not higher than that stated on the decal or rear panel of
the fixture.
• The fixture is intended to indoor use only. To prevent
risk of fire or shock, do not expose fixture to rain or
moisture. Make sure there are no flammable, explo-
sive or corrosive materials surrounded in 0.5 meter
while operating.
•
The unit must be installed in a location with adequate
ventilation, at least 50CM away from adjacent surfaces.
Be sure that no ventilation slots are blocked.
•
Do not operate at ambient temperatures higher than
104º(40º).
•
Safe wire should be used to install machine. Bearing of
safe wire should be 3 times of the machine weight. Com-
plimentary signal cable transmits signals to 20 unit fix-
tures at most. Signal amplifier is a must to connect more
fixtures. Sectional area of complimentary power cable is
1m2. In daisy chain model, it allows to connect to 4 fix-
tures at most.
•
Always disconnect from the power source before servic-
ing or replacing fuse/lamp and be sure to replace with
same fuse/lamp size and type. Cut off power before mov-
ing, repairing and cleaning the machine.
•
Secure fixture using a safety chain and carrying handles.
Never carry the fixture by its cord.
•
In case of failure or misfunction occurred, stop using the
unit immediately.
•
Repairs carried out by unskilled people can lead to dam-
age or malfunction. Buy the same spare parts/compo-
nents from manufacturer directly.
•
To avoid electric shock, all fixtures must be connected
to circuits with a suitable ground. Make sure the power
cord is never crimped or damaged. Do not power on and
power off the fixture in a short time. For your safety, do
not touch fixture when running.
•
When use DMX controller, please make sure that there
is no interference sources(e.g. intercom, high frequency
radio waves and radiation source)
Caution!
There are no user serviceable parts inside the unit. Do not
open the housing or attempt any repairs yourself. In the un-
likely event your unit may require service, please contact
your local distribution or after-sale service center.
For your safe, please read this user manual carefully before turn on the fixture. This machine should be operated by
qualified engineer.
