DSP-2600W
P. 11
ENGLISH VERSION
4. Output Polarity Setting:
Parameter Polarity, +Normal: Positive, -Invert:
Negative pole. Each channel has unattached
phase control.
Example
1.
Press OUT1 channel key about 3 seconds till the
yellow light display, into
Edit Status of OUT1.
2. Press “
<BACK or “NEXT>”, switch to Polarity.
Display next:
5. Output Delay Setting:
Parameter Delay, adjust range: 0ms-1000ms,
0Meter-346Meter, 0Feet-1134.88Feet. Each chan-
nel has unattached delay control.
Example
1.
Press OUT1 channel key about 3 seconds till the
yellow light display, into
Edit Status of OUT1.
2. Press “
<BACK or “NEXT>”, switch to Delay.
Display next:
3. Turn the first knob of “
PARA” to fine adjust-
ment. Turn the second knob to rough adjustment.
(Turn the knob clockwise, the value increases; Turn
the knob withershins, the value decreases).
