3.Quick Review
3.1.3.User Interface
Figure 33 User Interface
3.2.General Inspection
After you get a new power supply, it is recommended that you should make a check on the
instrument according to the following steps:
1. Check whether there is any damage caused by transportation.
If it is found that the packaging carton or the foamed plastic protection cushion has
suffered serious damage, do not throw it away first till the complete device and its
accessories succeed in the electrical and mechanical property tests.
2. Check the Accessories
The supplied accessories have been already described in the "Appendix A: Enclosure" of
this Manual. You can check whether there is any loss of accessories with reference to this
description. If it is found that there is any accessory lost or damaged, please get in touch
with the distributor of our responsible for this service or the our local offices.
3. Check the Complete Instrument
If it is found that there is damage to the appearance of the instrument, or the instrument can not
work normally, or fails in the performance test, please get in touch with the our distributor
responsible for this business or the our local offices. If there is damage to the instrument
caused by the transportation, please keep the package. With the transportation department
or the our distributor responsible for this business informed about it, a repairing or
replacement of the instrument will be arranged by the we.
⑤
COM port
Connect the serial port of the instrument and external
device
Buzzer status
Actual voltage output
Actual current output
Actual power output
Set values of voltage
Set values of current
Set values of O.V.P
Set values of O.C.P
CV
:
Constant Voltage output
CC
:
Constant Current outpu
t
Channel output status
5
