Basic documentation
9
TXV 171 04
1.3 ELECTRICAL PARAMETERS
Ethernet interface
Type (communication rate)
Physical interface
Connector
Galvanic isolation of internal circuits
10 / 100 Mbit/s
TP
standard RJ-45
Yes
Other parameters are dependant on installed sub-modules of communication interfaces and are
described in the documentation of the particular sub-modules.
1.4 SYSTEM PARAMETERS
Number of serial channels **
2
Ethernet interface 10 / 100 Mb
1
* Serial interfaces are optional by means of exchangeable sub-modules.
2. PACKAGING, TRANSPORTATION, STORAGE
The module is packed according to internal packing instructions into a cardboard box. This
documentation is enclosed in the packaging. The external packaging is done according to the
quantity and way of transportation into a shipping container being labelled and containing all the
necessary data for transportation.
The goods is transported from the manufacture's facilities as agreed when placing an order.
Transportation of the goods by the customer must be pursued by covered transport means and
in the position as indicated on the packaging. The shipping containers must be fixed in such a
way to avoid accidental spontaneous movement and damage of the external container during
transport.
During transportation and storage, the product must be protected from direct influence of
atmospheric actions. Transportation of the product is permitted within a temperature range of
-25 °C to 70 °C, relative humidity of 10 % to 95 % (without condensation) and minimum
atmospheric pressure higher than 70 kPa.
The product must be stored only in clean spaces free from conductive dust, aggressive
gases and vapours. The optimum storage temperature is 20 °C.
3. INSTALLATION
Installation of the module into the rack of the TC700 system shall be carried out according to
TXV 004 02. Mechanical dimensions are specified in documentation TXV 004 02.
4. POWER SUPPLY
The module is fed from a supply source, which is part of the TC700 system assembly.
Summary of Contents for SC-7104
Page 2: ......
