xDAQ-600 / xDAQ-600 (P) Operation Manual
Page 13
Some parameters are explained as follows:
Line : Choose to use the first set of lines (1) or the second set of lines (2)
Name : can be filled as required
Vibration
Name : fill in as required
Velocity RMS
Up Limit : When the vibration reaches this set value, an alarm will be issued. Please
fill in (mm / s) according to the specifications.
Up Early Warning : When the vibration reaches this set value, a warning
notification is issued. Please fill in (mm / s) according to the specifications.
Low : minimum vibration setting value, please fill in according to the specification
(mm / s).
High : The highest vibration setting value, please fill in according to the
specification (mm / s).
Sudden Change
Amplitude : Please fill in the value (mm / s) as required (if no value is filled in, this
function will be automatically turned off).
Time : Please fill in the value according to the requirements, the range is 5-60.
Acceleration RMS
