WM5030M-OD USER MANUAL
38
4.1.4. Network Parameters – Filter
Figure 40 displays Filter setting which include IP filter and MAC filter. It works in the same way as
Firewall with simple setting. On this page, user can set two kinds of filters: IP Filter and MAC Filter.
Click check box to enable desired filter settings.
Figure 40.
IP Filter Table
Press “Apply” at end of table to add a new IP Filter. (See Figure 40 and Figure 41 for setting details). If
“Pass” in Action field is selected, only user-specified IP addresses are allowed to access the wireless
network. If “Deny” in Action field is selected, only user-specified IP addresses are not allowed to
access the wireless network.
To remove a selected IP filter rule, select the desired rule, then press “Remove” at the end of the table
(see Figure 41).
