WM5030M-OD USER MANUAL
30
3
Software Upgrade from Web page
Recommendation:
To speed up the upgrade procedure, it’s suggested to stop all network traffic before upgrading. Open
“Scanning List” page, and click on “Disconnect” button.
Step 1
Connect the device to a PC or laptop. Configure IP address of network connection to be in the
same subnet as default device IP Address. Enter IP address (default is
192.168.111.113
) of device
from the Web Browser. For example:
192.168.111.113
.
A Dialogue Box will pop out and request user login.
Please enter the management username/password into the fields, then click on the OK button (default
username/password is
subscriber/subscriber)
Step 2
Obtain an updated software image file from your ISP. Go to Software Upgrade page and enter
the path to the image file location in the box below or click the “Browse…" button to locate the image
file which must be “.img” suffix in your computer. Click “Apply” to start upgrading the modem. Time
spent is dependent on the image size and the usage status of modem.
Figure 32.
Software Upgrade Page
WARNING
Interrupt the updating process may
crash this Modem Image. Please Wait
until the updating process is finished
before terminating the network or
switching off the device.
