TS1061 Dual Wiegand Interface Installation Manual
3
Before you begin
When installing a TS1061 Dual Wiegand Interface, or any other parts of the
system, you need to be aware of requirements for cabling and earthing, and plan
accordingly.
Refer to “Appendix D: Cabling requirements” on page 23.
Notice!
A qualified service person, complying with all applicable codes, should
perform all required hardware installation.
Disclaimer
:
This manual contains recommendations based on Australia and
New Zealand codes. It is not an authoritative reference regarding codes and has
not been reviewed by the responsible authorities. The codes may change and
may not be reflected in this document
Safety Warnings
Warning:
Field wiring errors or damage may present hazardous voltages inside
the enclosure. Treat all wires and boards in the enclosure as hazardous until
checked and validated as safe.
Warning:
Interlogix recommends the use of personal protection equipment, such
as gloves, glasses, voltage detectors and meters for all installation and
maintenance operations.
Warning:
The fuses on the TS1061 Dual Wiegand Interface may be very hot if
they are in the tripped state or close to tripping. Do not touch.
