TECOM HD3000 Series, User Manual

Page: 9 / 61

Ver. 2.0
HD3011/HD3010 User Manual 6/60
Item Define Color Function
1
Power
(Sigma chipset define)
Green
In case of a regular device:
The LED will blink if identifies a Domain Master
till completion of registration (very short time
period) and shall be Solid ON (Green) after
registration
In case of Domain Master device:
The LED will be solid ON (Green)
2
Ethernet
(Sigma chipset)
Green
“Blink”, indicates data transmission.
Green(Master)
“Green”, indicates PLC link is connected, the PHY
rate higher than 25Mbps
Red
(Slave)
In case of a regular device:
The LED will blink (RED) if identifies a Domain
Master till completion of registration (very
short time period).
Amber
Following registration, the Link LED shall be:
Amber”, indicates PLC link is connected, but
the PHY rate is lower than 25Mbps
3
Link
(Sigma chipset)
Green
“Green”, indicates PLC link is connected, the PHY
rate higher than 25Mbps
“Blink”, indicates data transmission.
Label Function
Reset Button ‐ The factory defaults press the rest button for more than 10 seconds. All settings will be
lost.
Link Button(Paring) ‐ To encrypt your PLC network individually, press each paring button on the connected
devices for at least 2 second – within 2 minutes
‐ To remove a PLC device from your network, press the paring button on the
corresponding device for at least 11 seconds