User Manual
10
1.4 Troubleshooting
Q:
The “Next” button is not activation after I connected my Smartphone to doorbell during
doorbell setup.
A:
1. Go back to the WiFi setting page to make sure it is connected with Doorbell
Camera_XXX.
2. If you have 3G/4G network connection, please turn off it and then try again.
Q:
After finish the setup procedure, the button indicator flashes red on Doorbell Camera.
On Cloud2door App, the red circle with a X appears on doorbell icon.
A:
When the button indicator flashes red slowly, it means that doorbell doesn’t connect to
network. It usually happens what a wrong password entered to cause Home WiFi router
connection failed. Please follow these steps to reconnect Doorbell Camera to Home WiFi
router again.
Step 1:
Click
(menu) at upper right corner, then select System Settings ->
Cloud2door Settings (you need to wait for connection time out.) -> Device Settings ->
Remove doorbell.
Step 2:
Pressing the call button for ten to fifteen seconds to enter Discovery mode
(button indicator flashes red and green).
Step 3:
Click “Add your new Doorbell Camera”, and then follow steps for final Setup.
Summary of Contents for Cloud2door
Page 1: ...Cloud doorbell Camera User manual Date 2017 1 20 ...
Page 17: ...User Manual 17 ...
Page 35: ...User Manual 35 ...
