ARMING YOUR SYSTEM
To arm the system, you must specify that you are leaving an area, by using the ON key.
Arming Procedure:
(The bottom line of the display must show “Code:”)
1 2 3 4 (Your PIN) <ON>
The area light(s) will illuminate.
If Areas are displayed after entering the code as above
:
? (Area number) <ENTER>
This will arm the selected area.
The area light(s) will illuminate.
<NEXT>
To Display more areas.
<ENTER> When arming is complete.
If at any time during the arming process the console sounds 7 quick beeps and displays
the work
unsealed
, refer to the Version 8 Challenger User Guide.
After an area is armed you will have a pre-set time to exit the area before an alarm
occurs.
DISARMING YOUR SYSTEM
To disarm, you must specify that you are entering an area, by using the OFF key.
Disarming Procedure: (The bottom line of the display must show “Code:”)
1 2 3 4 (Your PIN) <OFF>
The area light(s) will extinguish.
If Areas are displayed after entering the code as above:
? (Area number) <ENTER>
This will disarm the selected area.
The area light(s) will extinguish.
<NEXT>
To Display more areas.
<ENTER> When disarming is complete.
If at any time during the disarming process the console sounds 7 quick beeps and displays
the word
unsealed
, refer to the Version 8 Challenger User Guide.
On entering the area, the system will allow you a pre-set time to disarm before an alarm
occurs.