manualshive.com logo in svg

TECOM BT3021, User Manual, Page: 3 / 17

Share
Download
TECOM BT3021 User Manual Download Page 3

TECOM CO., LTD. 

TECOM Bluetooth Access Point PROJECT 

Prepared by: CPE-U1   

Internal Document 

 

[Product Revision Information] 

Page 

Revision 

Date Issued 

User's Manual

 

2

(4) 

0.1 

08-30-2002

 

2.3.  Bluetooth Clients supported 

Point-to-multipoint with 1.1 clients supporting: 
LAN Access Profile (LAP) 
WEBSITE UPDATES FOR COMPATIBILITY MATRIX??? 

2.4.  Configuration and Management 

Local connection, over Bluetooth or Ethernet LAN 
HTTP-based interface (RFC 2616/2617) 
DHCP (RFC 2131) Client and Server 
Static IP addressing 

2.5.  Bluetooth Radio 

PARTNERSHIP DEALS 

2.6.  Bluetooth Security 

 
Security Mode 1 (non-secure) 
Security Mode 2 (service level enforced security) 
Security Mode 3 (link level enforced security) 
128-bit link level authentication 
128-bit link level encryption 
Non-discoverable mode 

2.7.  Physical 

LED Status Indicators: Power/Status, Bluetooth and Ethernet Link and Activity 
Hardware connectors: LAN port: RJ-45 
Input Power Requirement: 6 to 9 VDC, 1.0 amp 
 

3.  Advanced Management and Configuration 

Bluetooth Access Point reference design has two of the most usable management and 
configuration interfaces in the market.   
 
The basic Web Interface let user can monitor and configure Access Point and all of 
Bluetooth devices information in anywhere.   
 
Locator™ is a multi-purpose cross-platform PC utility that can manage all bluetooth 
devices in a network through its simple interface. It is an ideal tool for auto-IP 
assignment, IP settings, firmware upgrades, and Web Interface discovery.  

3.1.  Web Management and Configuration 

If you have successful gone through the Quick Installation procedure in a 
DHCP-enabled network, you may want to monitor the Bluetooth activity on your 
Access Point through the Web Interface.   

Information

 page will display System Information such as the Bluetooth name of the 

Access Point, as well as, its firmware version and MAC address. It will also display 
network setup information such UBAP’s Internet Settings (IP Address, Subnet Mask, 
Gateway and DNS entries).   

Devices

 page will display the IP and MAC addresses of all the currently connected 

Bluetooth clients.   
 

Summary of Contents for BT3021


















Reviews:

No comments