TECOM CO., LTD.
TECOM Bluetooth Access Point PROJECT
Prepared by: CPE-U1
Internal Document
[Product Revision Information]
Page
Revision
Date Issued
User's Manual
15
(4)
0.1
08-30-2002
Finally, make sure that the password has not been changed. If you think that the
password
may have been changed and/or lost, you can restore the Access Point to the factory
defaults.
How do I restore the factory defaults?
Go to the Maintenance page in the Web Interface and follow the instructions to restore
the factory default settings.
How do I obtain additional support?
- Check
www.XXX.com/ html
for updates on Access Point firmware and other
support news.
Locator™ is a multi-purpose cross-platform PC utility that can manage all Ubicom
devices in a network through its simple interface. It is an ideal tool for auto-IP
assignment, IP settings, firmware upgrades, and Web Interface discovery for the
Ubicom Bluetooth Access Point.
Locator.exe does not need any setup to run on any Microsoft Windows™ environment.
It will scan the physical network as long as it is not separated by different routers and
identify Ubicom devices that may be in different subnets.
Simply connect the Access Point to your PC through a
cross-over
CAT5 Ethernet
cable (or connect both UBAP and your PC to a hub through normal Ethernet cables).
Running Locator will enable you to discover the Access Point immediately without a
need to adjust the PCs subnet to that of the Access Point’s.
Please refer to the Locator™ User Guide for more information.